Alluxity Int One mkII

Alluxity Int One mkII

Stunning craftsmanship, innovative design but above all, a really, really fantastic sounding range of hi-fi! You have to try these beauties.



The long awaited Int One Mk. II  update was a lot more challenging than originally anticipated. Lifting the level of performance significantly while still maintaining a reasonable price level was a difficult task in and of itself. Fitting all of the necessary electronics for all of the additional features into the original casework proved to be a hurdle on a whole new level since increasing the physical size of the original Int One chassis was not an option. After an extensive design process, Alluxity did, however, manage to fit everything Int One into the very limited space and the results has set a new standard for Alluxity for how much quality (both engineering and sound!) can fit into a given space. We are quite proud of our accomplishment.

What are the changes?

The number of volume relays has been greatly increased to offer 1dB volume sensitivity steps with a range from -79dB to +13dB. This allows for much better fine-tuning of music playback levels over the original Int One.
The completely redesigned preamp section is now fully balanced (making the Int One Mk. II fully balanced from input to output) with all of the benefits of balanced technology: lower noise/better signal-to-noise ratio, higher resolution, better bandwidth and +6dB of overall greater gain to name just a few.

Throughout the development it was mandatory to maintain the musicality and soothing tonality Alluxity is known for and no compromises were made in this regard. The result is seriously upgraded overall performance, while still being true to the powerful and neutral voice of the original Int One.


Analogue3 RCA / 2 XLR
Analogue1 RCA Pre Out
8/4/2 ohm RMS≈ 200W/400W/800W
Width43.5 cm / 17.1 in
Height10.5 cm / 4.1 in
Depth33.5 cm / 13.2 in
Weigth17.5 kg / 38.5 pounds
Power consumption<50W (no load)
Input/output impedance10 KΩ / 75 mΩ
Input sensitivity2/4 Vrms (RCA/XLR)
Frequency response+800kHz
THD + noise >0.01%
Signal to noise ratio>100dB
Volume-79dB to +13dB
Alluxity Range Brochure

Request A Price Match

Send Us A Message